Customization: | Available |
---|---|
After-sales Service: | 18 Months |
Warranty: | 18 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Main Technical Data of TH704 Tractor | ||
Tractor parameters | Model NO | TH704 |
Type | 4 x 4 wheeled drive | |
L x W x H(mm) | 3530 X 1755 X 2395 | |
Front wheel tread(mm) | 1100,1300 | |
Rear wheel tread(mm) | 1200-1500 | |
Min ground clearance | 350mm | |
Dry mass(kg) | 1525 | |
Clutch | Dry type single action | |
Steering | hydraulic steering | |
Transmission box | 12f + 12r shifts | |
Engine data | Engine brand | Yunnei |
Engine type | Inline,cooled water,four stroke | |
Engine Rated power | 51.5kw | |
Engine Rated speed | 2400(r/min) | |
Fuel | diesel | |
Tyre | Front Tyre | 8.3-24 |
Rear Tyre | 14.9-30 | |
PTO | Suspension type | Rear three point suspension category II |
Pto speed | 540/760,540/1000 r/min | |
Pto shift & spline size | 38 spline 8 teeth | |
Lifting force(N) | 14160 |
Main technical data of LW series tractor backhoe | |||||
Model | LW-6 | LW-7 | LW-8 | LW-9 | |
Specification | Metric | Metric | Metric | Metric | |
Tractor HP | 25-30HP | 30-45HP | 45-60HP | 70-100HP | |
3-point Linkage | Cat-1 | Cat-1 | CAT-1&2 | CAT-2 | |
Structure Weight(kg) | 480 | 500 | 580 | 620 | |
A | Digging Depth(two foot flat bottom)/mm | 1750 | 1950 | 2250 | 2550 |
B | Reach from center line of Swing pivot(mm) | 2600 | 2900 | 3200 | 3600 |
C | Loading Height(bucket at 60°) /mm | 1720 | 1840 | 1930 | 2210 |
D | Transport Height(maximum)/mm | 1840 | 2060 | 2130 | 2480 |
E | Extend Height(mm) | 2870 | 3110 | 3240 | 3590 |
F | Loading Reach(bucket at 60°)/ mm | 950 | 1180 | 1140 | 1360 |
G | Transport Overhang(mm) | 1080 | 1110 | 1220 | 1270 |
H | Undercut(mm) | 730 | 830 | 870 | 920 |
I | Bucket Rotation (°) | 180 | 180 | 180 | 180 |
J | Stabilizer Spread(up position)/mm | 1310 | 1310 | 1310 | 1310 |
K | Stabilizer Spread(down position)/mm | 2100 | 2100 | 2340 | 2340 |
L | Swing Arc (°) | 180 | 180 | 180 | 180 |
M | Bucket width(mm) | 300 | 400 | 450 | 500 |
N | Bucket cubage(cbm) | 0.036 | 0.045 | 0.052 | 0.06 |